14
䡵 To start “Service Scan”.
z If you set “Scan” to “Network”, the “Network” menu appears. Select
broadcasting stations from a list.
Installation
Service Scan
Update the PR list
Scan Select a “Scan” type
Automatic : Scan all receivable channels
Manual : Scan between the “Start channel” and “Stop channel”
Network : Scan all receivable channels, then you can select the
broadcasting stations to register
Start channel
If you select “Manual”, select the broadcast channel
numbers to start and stop scanning.
Stop channel
Mode Select a “Mode”
Add : Register only new channels and update the PR list.
The current PR list settings will not be changed. No
channel will be deleted.
Reinstall : Re-install all channels. The current PR list settings and
“Timer” settings will be cancelled. The channels which
the TV could not receive will be deleted.
Installation
Service Scan
Signal Check
Factory Settings
Select Exit
MENU
OK
Navigate
Service Scan
14:00
05/05/2008
Automatic
Service
Scan
_ _
Start Channel
_ _
Stop Channel
Add
Mode
Start Scan
䡵 To update the PR list
Set “Scan” to “Automatic” or “Network”. If you want to retain the
current PR list settings and “Timer” settings, set “Mode” to “Add”.
Then start “Service Scan”.
Mode Add
Start Scan
Scan completed! Store services?
Yes No
A select “Start Scan”
B start scanning
B set
A select “Yes”
BBC
Network Name
ITV
C set
A select
B registered / cancel
Customising your TV
LT-42DR9BJ_DTV_003A_EN.book Page 14 Wednesday, July 16, 2008 4:42 PM
To Next Page
Loading...
Need help?
General
