58
Button Functions
Use these buttons to raise or lower the TV’s volume level. The maximum is the level you set in
Volume Limit. See page 51.
Volume +/–
The Return+/TV button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels using the CH+ and CH– buttons.
TV - Returns to the TV mode.
Press the RETURN+/TV and hold for three seconds
The channel currently active has been programmed as your return+ channel. Now scan
through the channels using the C
HANNEL+/- buttons.
Press the RETURN+/TV
You will return to your programmed channel.
• To cancel your return+ channel, press and hold the RETURN+/TV button for three seconds.
The message “Return Channel Cancelled !” will appear.
• Return+ works only with the CHANNEL+/- buttons. Pressing any number key will cancel
return+.
Return +/TV
By pressing the SOUND button, you can change the A.H.S. (Advanced Hyper Surround) and
Smart Sound on or off.
A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more
effect.
Smart Sound - Decreases high sound levels, giving a regulated sound level.
Press the S
OUND button
π†
To select "A.H.S." or "Smart Sound"
è
To choose the setting
Press the MENU when finished
Sound
Exit
MENU
Select Operate
Sound Effect
OK
A.H.S.
Smart Sound
Off
On
Return Channel (123-456)
Programmed !
Note:
• Smart Sound may become an unnatural effect, depending on the signal source.
The MUTING button instantly turns the volume down completely when you press it. Press
MUTING and the volume level will instantly go to zero. To restore the volume to its previous
level, press M
UTING again.
Muting
LCT2224-001B-A English.indd 58LCT2224-001B-A English.indd 58 2/15/07 11:05:17 AM2/15/07 11:05:17 AM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
