JVC LT-32HA60U User Manual

EN
19
OPERATION
EN
Channel
Picture
Audio
Clock
Setup
Lock
Sleep Timer Off
Date 2010/04/30
On Time
f
Auto Sleep On
Time Zone
Of Time
5.SETUP MENU
The fifth item of the MENU is the SETUP MENU. You
can adjust the OSD language, Audio language,Subtitle
language etc.
In PVR File system menu you can set up USB
disk for PVR.
Auto Standby(4hr)
1. If after 4 hours from switch on, no changes have
been made to the TV (channel or volume changes,
for example), the TV automatic power-down process
will start. A pop-up window will appear on screen.
Channel
Picture
Audio
Clock
Lock
O E
A Languages
H
10 seconds
SD Language nglish
udio
Subtitle
Country Germany
PVR File System
Timeshift Record Time 1hour
Auto Standby(4hr) On(4 hours)
Mode Setting ome Mode
OSD Time
Restore Factory Default
HDMI CEC Control On
Setup
PVR Settings
Move Left
Move Right
Select
Exit
OK
EXIT
File Manager Device List
Scheduled Record
6.LOCK MENU
The sixth item of the menu is the LOCK MENU
You can lock system, set password, block program
and set parental guidance Once you set the lock
system on you can not search the channels or
change any programs.
Restore factory default will clear all the programs
and password.
Channel
Picture
Audio
Clock
Enter Password ----
Enable Off
New Password ----
Channel Locks
Parental Rating None
Setup
Lock
The default password is 6666. If you change the
password, be sure to remember the new password!
If you forget the new password, enter the master
password "9527".
Channel Locks: Press ▼▲ to choose the
program, press OK button to block
the program. If you want unblock the program,
please enter the main menu, input the password,
choose the program, then press OK button again.
Parental Rating: Press ◀▶to choose rating.
Timeshift Record Time: To set the max
Timeshift Record Time.
Auto Standby (4hr): To set the unit to
standby after 4 hours without any user
operation.
Mode Setting: To set Home mode or Shop
mode.
OSD Time: Press ◄ or ► to select the menu
display time.
Restore Factory Default
Press the ▼ or ▲ Buttons to select Restore
Factory Default and press the OK Button to
enter the first setup. Once confirmed, all the
settings will be cleared. This should be used
if you experience any issues with your TV.
HDMI CEC Control: To set CEC function to
on or off.
to standby. To override the automatic shutdown
press any button on the remote control.
2. To disable the automatic power-down of the TV,
go to Setup menu, select Auto Standby (4hr) and set
this option to Off by using the right arrow key.
After 150 seconds the TV will automatically switch
The fourth item of the menu is the CLOCK MENU
You can adjust the clock, power on/off time,
sleep timer etc .Press ▼▲ to move, press OK
to adjust.
To return to auto shutdown after 4 hours repeat the
above except use the left arrow key to select On(4
hours).
Auto Sleep
If after 15 minutes there is no signal input, the TV will
switch off to Auto Sleep, when the Auto Sleep function
is set to ON. The clock time is automatically set when
the TV is able to receive DTV.
4.CLOCK MENU
Return Move OK
OK
MENU
Return Move OK
OK
MENU
Return Move OK
OK
MENU
Note
Downloaded from www.vandenborre.be

JVC LT-32HA60U Specifications

General

Brand	JVC
Model	LT-32HA60U
Category	LED TV
Language	English