To Next Page

To Previous Page

GB-20

BASIC OPERATION

Selecting the Main Input Source

Onceyouhaveconnectedyourvariousaudioandvideosystems,youcanviewdifferentsourcesbyselectinginput

sources.

1 Press the AV button.

2 Select a main input among the sources and press the OK button.

NOTE: YoucaneasilyswitchtodigitalTVfromdifferentsourcesbypressingtheTV/DTV button.

Setting the Aspect Ratio

YoucanselectanaspectratiomodebypressingtheZOOM button repeatedly on the remote control.

Auto – Regular – Panoramic – 14:9 Zoom – 16:9 Zoom – 16:9 Zoom Subtitle – Full

SUBTITLE

Regular Panoramic 14:9Zoom

SUBTITLE

16:9Zoom 16:9ZoomSubtitle Full

NOTE:

WhenAutoisselected,youcanselectadefaultaspectratiofor4:3signal(exceptwhen480p/576pmode).

(Refer to p.26)

WhenthecomponentorHDMIinputmodewith480por576psignal,youcanselectonlytheAuto,FullorRegular.

WhenthecomponentorHDMIinputmodewith720por1080isignal,youcanselectonlytheFull,HDZoom or Slim.

SUBTITLE

Full HDZoom Slim

Forpictureswitha16:9aspectratiothathavebeensqueezedintoanormalpicture(4:3aspectratio),selectFullmodeto

restore their original dimensions.

To mode the picture vertically:

If you cannot see subtitles at the bottom of the screen, or if the top or bottom is cut off, move the picture vertically

usingthe▲/▼buttonbeforethedisplaydisappears.

NOTE: If you change the aspect ratio mode, the picture returns to its default position.

NOTE:

For LT-19DA9BJ model, you can select the follow modes.

Auto – Regular – Panoramic – Zoom – Zoom Subtitle – Full

▪

JVC LT-42DA9BJ User Manual

Other manuals for JVC LT-42DA9BJ