Replace the Remote Control Battery
Operating Your Remote Control
When you rst time use remote control, remove
the protective tab to activate the remote control
battery.
1. Pull out the battery tray.
2. Remove the old battery
3. Replace new CR2025 battery into the battery
tray with correct polarity as indicated.
4. Insert the battery tray back into the slot.
Handling the Remote Control
• Take care of your ngernails when you slide and pull the battery release tab.
• Do not drop the remote control.
• Do not allow anything to impact the remote control.
• Do not spill water or liquid on the remote control.
• Do not place the remote control on a wet object.
• Remove the battery from the remote control when not in use for a long period of time, as corrosion or
battery leakage may occur and result in physical injury, and/or property damage, and/or re.
• When the battery is exhausted, the remote control will not function.
• Small button cell batteries such as the one used in the remote control are easily swallowed by young
children and this is dangerous. Keep loose button cells away from young children and make sure that
the battery is secure in the remote control. Seek medical advice if you believe a battery cell has been
swallowed.
10
To Next Page
Loading...
Need help?
General
