17
Setting the Sleep Timer
Use the sleep timer to turn the system o after a certain number of minutes in play mode.
By setting the sleep timer, you can fall asleep to music and know that your system will turn
o by itself rather than play all night.
1. When in ON mode, press the SLEEP/TIMER button on the remote control repeatedly
to view the dierent sleep timer settings. The number of minutes shown will display in
this sequence:
SLEEP 90 SLEEP 60
OFF SLEEP 15
SLEEP 30
2. The system is now set to turn o after the number of minutes you have set. The display
will show “ ” icon.
3. Press the SLEEP/TIMER button to show the reminding time till the unit switches o
minutes and return back to previous screen.
4. To cancel the sleep timer press the SLEEP/TIMER button repeatedly until “OFF” shows
on the display.
System Reset
There may be times when you need to reset your unit back to the factory settings especially
when you have moved house. If you experience reception problems you may want to reset
and try again. If you move to another part of the country and pick up the local and national
DAB/FM stations in that area, your previously tuned channels may no longer be available.
1. When in FM or DAB mode, press the /MENU button on the remote control.
2. Press the / button to select SYSTEM, and then press the /PAIR button to
conrm.
3. Press the / button to select RESET, and then press the /PAIR button to conrm.
4. Press the / button to select Y, and then press the /PAIR button to conrm.
5. The display will show RESTART, and proceed system reset. All the stored stations will
be cleared.
Software version
This information may be requested when dealing with technical support issues.
1. When in FM or DAB mode, press the /MENU button on the remote control.
2. Press the / button to select SYSTEM, and then press the /PAIR button to
conrm.
3. Press the / button to select SW VER, and then press the /PAIR button to
conrm.
To Next Page
Loading...
Need help?
General
