JVC RX-778VBK Instructions

Using the On-Screen Menus
On-Screen Operation buttons (on the remote control)
You can use the Menus on the TV screen to control the receiven
To use this function, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 7), and set the
TVb input mode to the proper position to which the receiver is connected.
• When the TV's input mode is incorrect; for example, a different video input or TV tuner mode is selected, you
cannot show the Menus on the TV screen.
• Selecting the Different Source for Picture
and Sound (Also see page 10)
o
• Selecting the Source to Play (Also see page 9)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the A / V / <I / t> buttons also displays the
MAIN MENU.
Ii
MC
V
JAL :VCR
:OFF
SOUND CONTROL _
TUNER CONTROL _z
SETTING _
JME : 20__ OPERATE
Shows the buttons you
can use on the current
menu.
In this case, use A / v to
move _ up and down,
and <a/ c> to select,
adjust or set the item.
Note:
m
The on-screen display wil! disappear if no operation is done for
about 1 minute,
2, Press/x / V to move c_ to "SOURCE."
3, Press < / E> to select the source.
4. When you finish, press EXIT.
The menu disappears from the TVI
1, Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the A / V / <I / t> buttons also displays the
MAIN MENU.
.
3,
Press/x / V to move c_
to "VISUAL."
Press <1/ [> to select a
different video source.
MODE :OFF
_* SOUND CONTROL _
** TUNER CONTROL **
*_ SETTING **
[)(]:OPERATE
VOLUME : 2OlllL ...............
4. When you finish, press EXIT.
The menu disappears fi-omtheTV.
• Activating the DSP Modes (Also see page 27)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the A / V / <I / t> buttons also displays the
MAIN MENU.
2. Press/x / V to move cJ
to "MODE."
3, Press <a/ E>to select th_
DSP mode you want to
use.
O
SOURCE :VCR
VISUAL :VCR
_ SOUND CONTROL _
x_ TUNER CONTROL **
x_ SETTING **
I_:OPERATE
VOLUME : 201lie ...............
4. When you finish, press EXI'I_
The menu disappears fi-omthe TV.
• Adjusting the Front Speaker Output Balance
(Also see page 12)
1, Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the A / V / <I / t> buttons also displays the
MAIN MENU.
.
.
.
to "BAL." (Balance).
Press <a/ E>to adjust
the balance.
Press/x / v to move cJ to "SOUND
CONTROL," then press <1 / C>.
The SOUND CONTROL menu appears.
Press A / v to move c_
o
_ SURROUND LEVEL _
_ SEA _
LOUDNESS : OFF
INPUT ATT : NORMAL
SUBWFR LEVEL: O!
o
I_:OPERATE
5, When you finish, press EXIT repeatedly until the
menu disappears t_om the TV,
28

JVC RX-778VBK Specifications

General

Brand	JVC
Model	RX-778VBK
Category	Receiver
Language	English