JVC SP-NXBD3W User Manual

64
(Continued on the next page.)
Operate the remote control by pointing it at the TV.
NOTE
• When the remote control mode selector is slid to
[TV A], some buttons may not work.
1 Slide the remote control
mode selector to [STB/
VCR].
2 Press [STB] or [VCR].
3 Hold down [STB/
VCR A].
• Hold down [STB/VCR A] until you finish step
5.
4 Press [ENTER] and release.
5 Press [the number buttons] to enter
the manufacturer code.
Manufacturer codes for VCRs
Examples:
For a Hitachi VCR: Press [0], then [8].
For a Toshiba VCR: Press [3], then [3].
When the manufacturer of your VCR has 2 or more
codes, select the manufacturer codes in turn and find
the one that operates the VCR and the remote control
properly.
Using the remote control for the TV
operation
Remote control
button
Usage
[TV A]Turns on/off the TV.
[TV/VIDEO] Changes between the TV and
video input.
[CH +/-] Changes channels.
[TV VOL +/-] Adjusts volume.
[the number
buttons]
(1-9, 0, 100+)
Slide the remote
control mode
selector to [TV]
in advance.
Selects the
channels.
[TV RETUEN] Changes
between the
previously
selected channel
and the current
channel.
Operating a STB/VCR using
the remote control
Setting the manufacturer code
Manufacturer Code Manufacturer Code
JVC 01 Nokia 16
Aiwa 02, 20 Nordmende 17, 18, 19,
31
Bell+Howell 03, 16 Orion 20
Blaupunkt 04 Panasonic 21
CGM 03, 05, 16 Philips 05, 22
Daewoo 34 Phonola 05
DIGTAL 05 Saba 17, 18, 19,
23, 31
Fisher 03, 16 Samsung 24, 25
G.E. 06 Sanyo 03, 16
Grundig 07 Sharp 26, 27
Hitachi 08, 09Siemens 07
Loewe 05, 10, 11 Sony 28, 29, 30,
35
Magnavox 04, 05 Telefunken 17, 18, 19,
31, 32
Mitsubishi 12, 13, 14,
15
Toshiba 33

JVC SP-NXBD3W Specifications

General

Brand	JVC
Model	SP-NXBD3W
Category	Blu-ray Player
Language	English