JVC TM-H150CG User Manual

ENGLISH
Contents
SAFETY PRECAUTIONS ................................................................................. 2
Controls and Features .................................................................................... 4
Front Panel .................................................................................................... 4
Rear Panel ..................................................................................................... 6
Input Card (option) ......................................................................................... 7
Preparation ...................................................................................................... 9
Installing the Input Card ................................................................................. 9
Basic Menu Operations
(MENU, SET-UP MENU)............................................................... 10
How to Use MENU ......................................................................................... 12
How to Use SET-UP MENU ........................................................................... 13
How to Use the External Control.................................................................. 15
Troubleshooting ............................................................................................ 16
Specifications ................................................................................................ 18
SCREEN BURN
● It is not recommended to keep a certain still image displayed on screen for a long time as well as displaying extremely bright
images on screen. This may cause a burning (sticking) phenomenon on the screen of cathode-ray tube. This problem does not
occur as far as displaying normal video playback motion images.
 Supplementary Explanation
= Information for monitor operation =
This monitor uses a high precision CRT (cathode ray tube). Please follow the procedures below.
* For stable operation of the CRT, approximately 30 minutes running time is required from the time the power is turned on.
* When the monitor is installed, it can be easily affected by surrounding magnetic fields, which can generate irregular color
on the screen. When it is difficult to eradicate, degauss from outside using a degausser, etc.
Fuse
POWER CONNECTION
The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 220 – 240 V (For European
countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the
power cord designated to ensure Safety and EMC regulations of each countries.
Power cord
Power supply voltage : AC 120 V AC 220 – 240 V AC 220 – 240 V
Countries : U.S.A. and Canada European countries United Kingdom
Warning:
● Do not use the same Power Cord for AC 120 V as for AC 220 – 240 V. Doing so may cause malfunction, electric shock
or fire.
Note for the United Kingdom power cord only
The plug on the United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a correctly rated
approved type, re-fit the fuse cover.
(Consult your dealer or qualified service personnel.)
How to replace the fuse
Open the fuse compartment with the blade screw driver, and
replace the fuse.
(* An example is shown in the illustration.)
3
TM-H150CG_Cover.p65 04.1.17, 4:05 PM7

JVC TM-H150CG Specifications

General

Aspect ratio	4:3, 16:9
Display diagonal	15 \
Power requirements	120V AC, 220-240 V AC, 50/60Hz
Video in	A: BNC x 2, B: BNC x 2
Product color	Gray

Weight and Dimensions

Weight	12200 g
Dimensions (WxDxH)	360 x 410 x 310 mm