EasyManuals Logo
Home>JVC>Speaker System>UN-AD8

JVC UN-AD8 User Manual

JVC UN-AD8
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
15
Adjusting the Audio Input Level
If the sound from the component connected to the
“AUX 1” or “AUX 2” jack is too loud or not loud enough
when changing from another source to “AUX 1” or “AUX
2,” you can change the audio input level through the AUX 1
jack on the front panel or the AUX 2 jacks on the rear panel
(without changing the volume level).
While the “AUX 1” or “AUX 2” is selected as a source...
Setting the Clock
Without setting the built-in clock, you cannot use Timers
(see page 30) and Sleep Timer.
To correct a misentry during the process, press CANCEL
(while holding SHIFT) or CLOCK/TIMER. You can
return to the previous step.
1 Activate the clock setting mode.
If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
2 Set the time.
Adjust the hour and press SET. And then adjust the
minute and press SET.
Now the built-in clock starts working.
To check the current clock time during play
*For DivX and MPEG-4 discs, the display changes as
follows.
Turning Off the Power Automatically
Auto Standby
When Auto Standby is in use, the A.STANDBY indicator
lights on the display.
When disc or tape play stops, the A.STANDBY indicator
starts flashing. If no operation is done for about 3 minutes
while the indicator is flashing, the System turns off (stands
by) automatically.
Sleep Timer
You can set the shut-off time so that you can go to bed
without turning it off by yourself.
1 Specify the time (in minutes).
2 Wait until the set time goes off.
To check the time remaining until the shut-off time, press
SLEEP while holding SHIFT.
If you press the button repeatedly, you can change the shut-
off time.
AUX LVL1 Select this when the sound is too loud
(initial setting).
AUX LVL2 Select this when the sound is not loud
enough.
Remote
ONLY
AUX LVL1
AUX LVL2
SET
CANCEL
2 sec.
Remote
ONLY
INFO
CLOCK/
TIMER
CANCEL
SET
TV/VIDEO
DISPLAY
Clock
Source information
Clock
Source information
Disc type
(DIVX/MPG4)
Remote
ONLY
A.STANDBY
6
On
Canceled
(While holding...)
SLEEP
9
10 20 30 60 90 120
Canceled
150
(While holding...)
UX-AD8[A].book Page 15 Tuesday, November 22, 2005 1:59 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC UN-AD8 and is the answer not in the manual?

JVC UN-AD8 Specifications

General IconGeneral
BrandJVC
ModelUN-AD8
CategorySpeaker System
LanguageEnglish

Related product manuals