24
5 Select a group to record tracks into.
• When you make a new group:
1 Select “FORM GR ?” mode.
2 Make a new group.
• The first new group you make is displayed as the
2nd group because the root of the memory of USB
device is recognized as the 1st group.
• You can enter the title of new group in this step.
When you want to enter the title of the new group,
see “Entering Titles” on page 29.
3 Start recording.
• When you select an existing group:
1 Select a desired group.
• How to select an existing group, see “To select a
group” on page 9.
2 Start recording.
• When you want to record into the root group (G1
MUSIC):
6 Start playing the source. (Only for the iPod or
portable audio device)
When the sound signal comes into the System, recording
starts automatically.
• When the incoming signal from portable audio device is
too weak, recording does not start. In this case, increase
the volume on the portable audio device.
• When recording does not start, you can start recording
manually by pressing MEMORY 6 or USB 6.
When the signal does not come in for 30 seconds,
recording stops.
To stop recording.
To record onto built-in
memory:
To record onto USB
device:
Ex. When 5th group was made
(on the main unit)
(on the main unit)
To record onto built-in
memory:
To record onto USB
device:
(on the main unit)
(on the main unit)
UX-DM8[U].book Page 24 Monday, June 4, 2007 8:20 PM
To Next Page
Loading...
Need help?
General
