30
Forming a Group (FORM GR)
You can make a group into the built-in memory.
• You can create only an empty group by this function. An
empty group can be used only for recording or editing.
After recording or moving the tracks into the empty group,
you can select that group to play.
• You can make up to 999 groups in the built-in memory or
USB device. When you record a 1000th group, “GROUP
FULL” appears on the display and no group will be made.
Example: Making 2nd group.
1 Start and stop playback of the built-in memory.
2 Select “FORM GR.”
3 Make a new group.
4 Enter a title of a new group.
• For entering a title, see “Entering Titles” on page 29.
5 Store the entered title.
“EDITING” appears on the display. The message goes off as
the group is stored.
Moving a Track (MOVE)
You can move a track to another group in the built-in
memory.
Example: Moving the track “B” in the 1st group to the 2nd
group.
1 Start playing a track you want to move in the built-in
memory.
2 Select “MOVE.”
Group 1
Group 1 Group 2
TITLE FORM GR
ERASE
MOVE
FORMAT
TITLE FORM GR
ERASE GR
FORMAT
Canceled
or
Canceled
To go back to
previous step:
To quit editing:
or
Group 1
Group 1 Group 2
Group 2
TITLE FORM GR
ERASE
MOVE
FORMAT
Canceled
Continued on the next page
UX-DM8[U].book Page 30 Monday, June 4, 2007 8:20 PM
To Next Page
Loading...
Need help?
General
