10
To change the USB connection mode
You can change the USB connection mode according to the
type of USB device.
1 Display the current USB connection mode.
2 Select the USB connection mode.
• The System may not play back some MTP devices though
it recognizes them.
• This System cannot record files on an MTP device.
• This System cannot edit files in an MTP device.
To play back a disc/track
To select a group
While playing a disc/track...
• You can select a group directly by pressing a number
button after pressing GROUP SELECT.
• Group name appears for MP3/WMA/WAV playback.
To select a track
While playing a disc/track...
To locate a particular portion
While playing a disc/track...
• This function is not available for some digital audio player.
To locate a track directly
You can select a track directly and start playback.
MSC Only suitable for USB mass storage class
(MSC) device. You can record, edit and move
the track to the USB mass storage class device.
AUTO Suitable for USB mass storage class (MSC)
device and media transfer protocol (MTP)
device. The System detects the device type—
MSC or MTP, and selects the appropriate
mode for the device.
To start/pause: To stop:
Remote
ONLY
2 sec.
MSC
AUTO
(Initial setting)
For CD For built-in
memory
For USB
device
• When you press 4 for the
first time, you go back to the
beginning of the current track.
Examples:
To select number 5, press 5.
To select number 10, press 10.
To select number 15, press 10,
1, then 5.
To select number 30, press 10,
3, then 0.
Remote
ONLY
Remote
ONLY
UX-DM9[B].book Page 10 Friday, July 20, 2007 2:18 PM
To Next Page
Loading...
Need help?
General
