EasyManuals Logo
Home>JVC>Stereo System>UX-DM9DB

JVC UX-DM9DB User Manual

JVC UX-DM9DB
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
11
Playing Back an iPod
Compatible iPod types
iPod is a trademark of Apple Inc., registered in the U.S. and
other countries.
If the iPod does not play correctly, update your iPod
software to the latest version. For details about updating
your iPod, check on the Apple web site
<http://www.apple.com>.
To connect an iPod
1
Attach the dock adapter to the docking station.
Disconnect the docking station from the main unit when
attaching/detaching the dock adapter.
Do not damage the terminal on the docking station
when attaching/detaching the dock adapter.
2 Connect an iPod while the System is turned off.
Insert the plug into the iPod terminal on the System with
the arrow mark side down and align the arrow mark with
the 5 mark on the front panel.
Be sure to reduce the volume on the System to the
minimum level before connecting an iPod. Adjust the
volume after starting playback.
DO NOT connect or disconnect the iPod when the System is
turned on.
“iPod CONNECT” appears while an iPod is connected.
To disconnect the iPod safely, turn the System off before
disconnecting it.
You cannot send any data to your iPod from the System.
Do not carry the System with iPod connected. You might
drop it and cause damage to the connector part.
Do not touch or hit the iPod terminal pins or connector pins.
It might cause damage to the connector part.
If an incompatible iPod type is connected, the iPod may not
be operated from the System. To enable the operation,
before connecting the iPod, switch the charge mode to
“OFF” (see “To turn on/off the charge mode” on page 12).
Sound distortion may occur when playing back audio
sources with high recording levels. When distortion
occurs, it is recommended that you turn off the equalizer of
the iPod. For information on operating the iPod, see the
iPod instruction manual.
To play back an iPod
To turn off the iPod
While “iPod” is selected as the source...
To select a track
While playing an iPod...
iPod nano 1GB/2GB/4GB
iPod nano (2nd Generation) 2GB/4GB/8GB
iPod mini 4GB/6GB
iPod (4th Generation) 20GB/40GB
iPod photo (4th Generation) 20GB/30GB/40GB/60GB
iPod video (5th Generation) 30GB/60GB/80GB
Dock adapter
(supplied with iPod or
separately purchased)
Docking station
(supplied)
To detach the dock adapter
from the docking station:
Push the slot then pull up the dock
adapter.
On the front panel
Docking station for iPod (supplied)
arrow mark
5 mark
The System detects the iPod
and starts playback.
Press the button again to pause
playback.
When you press 4 for the
first time, you go back to the
beginning of the current track.
2 sec.
UX-DM9[B].book Page 11 Friday, July 20, 2007 2:18 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC UX-DM9DB and is the answer not in the manual?

JVC UX-DM9DB Specifications

General IconGeneral
BrandJVC
ModelUX-DM9DB
CategoryStereo System
LanguageEnglish

Related product manuals