37
3 Select track.
4 Select a destination group.
5 Select the new track number in the destination group
for the target track.
6 Start moving.
“EDITING” appears on the display. The message goes off as
the editing result is stored.
Erasing the Tracks (ERASE)
You can erase tracks on the built-in memory or USB device.
• Once tracks are erased, you cannot restore them.
Example: Erasing the track “B.”
1 Select a desired source.
2 Select “ERASE.”
3 Confirm your selection.
4 Select the tracks you want to erase.
• You can select up to 15 tracks by repeating this step.
When you select a 16th track, “MEMORY FULL”
appears on the display.
5 Confirm your selection.
To go back to
previous step:
To quit editing:
Group title
Track title
or
Remote
ONLY
USB
device
Built-in
memory
TITLE FORM GR
ERASE
MOVE
FORMAT
Canceled
UX-DM9[B].book Page 37 Friday, July 20, 2007 2:18 PM