JVC UX-G28 User Manual

9
Listening to the Radio
To select the band (FM or AM)
You can also carry out the same operation using the FM/
AM/AUX on the System.
To tune in to a station
While FM or AM is selected...
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step.
To stop searching manually, press either button.
If the received FM station is hard to listen
Select "FM MONO"
To preset the stations
You can preset 20 FM and 10 AM stations.
1 Tune in to a station you want to preset.
2 Activate the preset number entry mode.
• Finish the following process while the indication on the
display is flashing.
3 Select a preset number for the station you store.
• How to Select Numbers, see page 8.
• You can also use the 4/¢ buttons.
4 Store the station.
To tune in to a preset station
1 Select a band (FM or AM).
2 Select a number of the preset station you stored.
How to Select Numbers, see page 8.
You can also use the 4/¢ .
Remote control: Main unit:
FM MONO: Reception will improve though stereo
effect is lost. MONO indicator lights up.
FM/AM/AUX
FM FM MONO
AUX
AM
TUNING/GROUP
1 sec.
1 sec.
FM/AM/AUX
FM FM MONO AM
AUX
DISPLAY/
PROGRAM
PROG.
kHz
DISPLAY/
PROGRAM
FM/AM/AUX
FM AMFM MONO
AUX
UX-G28[J].BOOK Page 9 Monday, November 12, 2007 10:49 AM

JVC UX-G28 Specifications

General

Impedance	4 Ω
RMS rated power	16 W
Number of speakers	2
Signal-to-Noise Ratio (SNR)	85 dB
Total Harmonic Distortion (THD)	10 %
Supported radio bands	AM, FM
Type	Home audio micro system
Product color	Black
Optical disc player	Yes
Number of optical discs	1 discs
Speaker depth	178 mm
Speaker width	136 mm
Speaker height	212 mm
DVD Audio playback	No
Display type	LCD
USB 2.0 ports quantity	1

Weight and Dimensions

Weight	2500 g