EasyManuals Logo
Home>JVC>Stereo System>UX-M3R

JVC UX-M3R User Manual

JVC UX-M3R
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
7
2 Connect the supplied AM loop antenna to the
AM LOOP terminal.
Place the antenna away from the unit and adjust its
position for the best reception.
3 Adjust the position of the FM antenna for the
best reception.
4 Connect the AC power cord of the unit to the
AC outlet after all other connections have
been made.
1
2
3
02_01_21_UXM3R_A_En.p65 02.1.21, 7:22 PM7

Other manuals for JVC UX-M3R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC UX-M3R and is the answer not in the manual?

JVC UX-M3R Specifications

Amplifier Specifications IconAmplifier Specifications
output power24 W (12 W + 12 W) at 8 Ω (MAX.)
output power at THD20 W (10 W + 10 W) at 8 Ω (10% THD)
audio output level800 mV/32 Ω
speakers impedance8 Ω - 16 Ω
Tuner Specifications IconTuner Specifications
FM tuning range87.50 MHz - 108.00 MHz
MW tuning range522 kHz - 1 629 kHz
CD Player Specifications IconCD Player Specifications
dynamic range60 dB
signal-to-noise ratio60 dB
wow and flutterUnmeasurable
Cassette Deck Specifications IconCassette Deck Specifications
frequency response for normal tape100 Hz - 10 000 Hz
wow and flutter0.35% (WRMS)
General Specifications IconGeneral Specifications
power requirementAC 240 V, 50 Hz
power consumption (operation mode)30 W
power consumption (standby mode)1.5 W
dimensions160 mm × 269.5 mm × 300 mm
mass4.3 kg
Speaker Specifications IconSpeaker Specifications
speaker unit (woofer)10.2 cm cone × 1
speaker unit (tweeter)5.1 cm cone × 1
impedance8 Ω
dimensions160 mm × 269.5 mm × 192 mm
mass2 kg/each

Related product manuals