JVC UX-M3R User Manual

– 9 –
Digital Sound Control
The unit’s digital sound control feature enables you to select
desired preset equalizer settings (selectable as sound modes)
to enjoy special sound effects matching the music type.
You can also use the HBS (Hyper Bass Sound) system to
enjoy powerful bass sound created by emphasizing low
frequencies.
To select the desired sound mode
Press PRE EQ/HBS repeatedly.
Each time you press the button, the
sound mode changes as follows:
POP CLASSIC ROCK
JAZZFLAT
POP: More presence in the vocals and midrange
CLASSIC: Enriched sound with fine treble and ample bass
ROCK: Powerful sound emphasizing treble and bass
JAZZ: Accented lower frequencies for jazz-type music
FLAT: Equalizer effect is canceled.
To switch the HBS system on/off
Press and hold PRE EQ/HBS until
“HBS ON” or “HBS OFF” appears on
the display.
When the HBS system is switched on,
the HBS indicator lights up on the
display.
PRE EQ
/HBS
PRE EQ
/HBS
02_01_21_UXM3R_A_En.p65 02.1.21, 7:23 PM9

JVC UX-M3R Specifications

Amplifier Specifications

output power	24 W (12 W + 12 W) at 8 Ω (MAX.)
output power at THD	20 W (10 W + 10 W) at 8 Ω (10% THD)
audio output level	800 mV/32 Ω
speakers impedance	8 Ω - 16 Ω

Tuner Specifications

FM tuning range	87.50 MHz - 108.00 MHz
MW tuning range	522 kHz - 1 629 kHz

CD Player Specifications

dynamic range	60 dB
signal-to-noise ratio	60 dB
wow and flutter	Unmeasurable

Cassette Deck Specifications

frequency response for normal tape	100 Hz - 10 000 Hz
wow and flutter	0.35% (WRMS)

General Specifications

power requirement	AC 240 V, 50 Hz
power consumption (operation mode)	30 W
power consumption (standby mode)	1.5 W
dimensions	160 mm × 269.5 mm × 300 mm
mass	4.3 kg

Speaker Specifications

speaker unit (woofer)	10.2 cm cone × 1
speaker unit (tweeter)	5.1 cm cone × 1
impedance	8 Ω
dimensions	160 mm × 269.5 mm × 192 mm
mass	2 kg/each