Headphones and connection code are not included in
this unit.
.
Headphones
(commercially available)
Audio cable
(not included)
Portable audio
player, etc.
Stereo
mini plug
To listen to the portable audio player
1
Use an audio cable to connect the portable
audio player, etc., to the AUDIO IN terminal.
0
When using video equipment, connect the
audio output to this unit and the video output to
a television.
2
Press the [A] button to turn on the power.
3
Press the [AUDIO IN/AUX] button on the
remote control or [SOURCE] button
repeatedly on main unit to select “AUDIO IN”
function.
4
Play back the connected devices
0
If volume level of the connected device is too
high, sound distortion may occur. Should this
happen, lower the volume of the connected
device. If volume level is too low, increase the
volume of the connected device.
To listen by using headphones
1
Connect the headphones to the PHONE
terminal
0
Be sure to turn down the volume before
connecting or putting on the headphones.
0
Connecting the headphones deactivates the
speakers.
41
Connecting Other Devices and Headphones
To Next Page
Loading...
Need help?
General
