JVC XV-SA600BK User Manual

Changing the initial settings
65
Changing the
initial settings
English
1 Use 5 / ∞ to move to [DELAY] and press
ENTER.
The DELAY display page appears on the TV screen.
points to [CENTER SPEAKER].
See page 56 for details about how to bring up the
“SPK.SETTING” page.
2 Use 5 / ∞ to select the speaker to be set and
press ENTER.
CENTER SPEAKER:Center speaker
REAR SPEAKER: Rear speakers
3 Use 5 / ∞ to select the delay time and press
ENTER.
When you select “CENTER SPEAKER,” you can
select the delay time from “0.0m/0ft” to
“1.5m/5ft” in 1ft units.
When you select “REAR SPEAKER,” you can select
the delay time from “0.0m/0ft” to “4.5m/15ft” in 1ft
units.
4 Repeat steps 2 and 3 if you set other
speakers.
• To return to the “SPK. SETTING” page
Use 5/∞ to move to [RETURN] and press ENTER.
You can adjust the output level of each speaker.
¶ While the “SPK.SETTING” page of the preference
display is shown
1 Use 5 / ∞ to move to [LEVEL] and press
ENTER.
The LEVEL display page appears on the TV screen.
points to [CENTER SPEAKER].
See page 56 for details about how to bring up the
“SPK.SETTING” page.
2 Use 5 / ∞ to select the speaker to be set and
press ENTER.
FRONT SPEAKER: Front speakers (This item
cannot be selected. The level is
fixed to 0dB.)
CENTER SPEAKER: Center speaker
REAR SPEAKER: Rear speakers
SUB WOOFER: Subwoofer speaker
3 Use 5 / ∞ to set the level and press ENTER.
When you select “CENTER SPEAKER,” “REAR
SPEAKER” or “SUB WOOFER,” you can select the
level from –6 to 6dB in 1dB units.
4 Repeat steps 2 and 3 if you set other
speakers.
• To return to the “SPK.SETTING” page
Use 5/∞ to move to [RETURN] and press ENTER.
To generate test tone signals
You can check the level setting by monitoring the test
tone.
1 Use 5 / ∞ to select [TEST TONE] and press
ENTER.
2 Use 5 / ∞ to select [ON] and press ENTER.
The test tone will be generated when you select the
speaker(s) in the “LEVEL”display.
NOTE
• For the speaker(s) whose size is set to “NONE,” the
delay time cannot be set.
To set the speaker level
SELECT
ENTER
USE 5∞ TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
RETURN
DELAY
CENTER SPEAKER
0.0m/ 0ft
REAR SPEAKER
0.0m/ 0ft
TV2
2
TV1
1
TV3
3
TV5
5
TV4
4
TV6
6
TV8
8
TV7
7
TV9
9
TV0
0
TV-/--
10
MUTING
+10
TV/VIDEO
CANCEL
TITLE/
GROUP
RETURN
VFPAUDIOSUB TITLEREPEAT
ANGLEDIGEST
3D
PHONIC
ZOOM
AMP VOL
PROGRESSIVE
SCAN
fs/Rate
RM-SXV011J
REMOTE CONTROL
OPEN/
CLOSE
TV DVD
NEXTPREVIOUS
SELECT STROBECLEAR
SLOW
- SLOW+
VOL - VOL+
CH
+
CH
-
T
O
P
M
E
N
U
M
E
N
U
O
N
S
C
R
E
E
N
C
H
O
I
C
E
ENTER
STANDBY/ON
TV DVD
PAGE
ENTER
5/∞
NOTE
• For the speaker(s) whose size is set to “NONE,” the
speaker level cannot be set.
SELECT
ENTER
USE 5∞ TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
FRONT SPEAKER
0dB
RETURN
LEVEL
CENTER SPEAKER
0dB
REAR SPEAKER
0dB
TEST TONE
OFF
SUB WOOFER
0dB
CHANGING_INITIAL_SETTINGS.fm Page 65 Friday, April 26, 2002 1:33 PM

JVC XV-SA600BK Specifications

General

Brand	JVC
Model	XV-SA600BK
Category	DVD Player
Language	English