Page 4 Operating Instructions Powador 2500xi / 3600xi / 4000xi / 4500xi / 5000xi_EN
General Notes
By purchasing an inverter from KACO new energy GmbH,
you have opted for a reliable, high-performance technology
and will profi t from KACO new energy GmbH’s many years
of experience in the fi eld of current inverter technology and
power electronics.
The Powador 2500xi, 3600xi, 4000xi, 4500xi and 5000xi
inverters are transformerless, fanless, robust, high-effi ciency
inverters. Using the illuminated display and intuitive menu
navigation, you can display the most important information
pertaining to the inverter’s grid feed. The mounting plate that
is included provides for optimal and simple installation on a
wall. The inverter’s data can be transmitted over the serial
interface to a PC, where it can then be visualised.
With protection class IP54, the units are ready for operation in
all ambient conditions. The inverters can also be used without
hesitation in agriculture and industry.
1 About This Documentation
The following notes guide you through all of the documenta-
tion. Additional documents are applicable in conjunction with
these operating and installation instructions.
We assume no liability for any damage caused by failure to
observe these instructions.
Other applicable documents
When installing the inverters, be sure to observe all assembly
and installation instructions for components and other parts of
the system. These instructions are delivered together with the
respective components and additional parts of the system.
1.1 Retention of documents
Please pass these operating and installation instructions on to
the plant operator. These documents must be stored next to
the system and must be available at all times.
1.2 Symbols used in this document
When installing the inverter, observe the safety instructions
provided in these installation instructions.
Danger due to lethal voltages.
1.3 CE marking
The CE marking is used to document that the Powador inverter
shown on the name plate fulfi lls the fundamental require-
ments of the following relevant directives:
Directive concerning electromagnetic compatibility
(Council Directive 2004/108/EC)
Low Voltage Directive
(Council Directive 2006/95/EC).
1.4 Name plate
The name plate showing the exact designation of the unit is
located on the support plate on the underside of the housing.
Section 1 · About This Documentation
DANGER
Failure to observe a warning indicated in this
manner will directly lead to serious bodily injury
or death.
Failure to observe a warning indicated in this
manner may directly lead to serious bodily injury
or death.
WARNING
CAUTION
Failure to observe a warning indicated in this
manner may lead to minor or moderate bodily
injury or to serious damage to property.
AT T ENTION
Failure to observe a warning indicated in this manner may
lead to damage to property.
NOTE
Useful information and notes.
ACTION
This symbol indicates that a certain action is required.
IMPORTANT
Failure to observe this information may result in reduced
convenience or impaired functionality.
To Next Page
Loading...
Need help?
General