Kärcher HD 10/25-4 Cage Plus User Manual

18 English
Î Install the low pressure nozzle.
Î Check/ clean detergent suction hose
with filter.
Î Clean/ replace backflow valve in the
connection of the detergent suction
hose.
Î Open or check/clean detergent dosing
valve.
Î Contact Customer Service if needed.
– Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and troublefree.
– At the end of the operating instructions
you will find a selected list of spare parts
that are often required.
– For additional information about spare
parts, please go to the Service section
at www.kaercher.com.
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of your appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication. In the event of a warran-
ty claim please contact your dealer or the
nearest authorized Customer Service cent-
er. Please submit the proof of purchase.
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Alfred Kärcher GmbH Co. KG
Alfred Kärcher-Str. 28 - 40
D - 71364 Winnenden
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
Spare parts
Warranty
CE declaration
Product: High-pressure cleaner
Type: 1.286-xxx
Relevant EU Directives
98/37/EC
2006/95/EC
2004/108/EC
2000/14/EC
Applied harmonized standards
EN 55014–1: 2006
EN 55014–2: 1997 + A1: 2001
EN 60335–2–79
EN 60335–1
EN 61000–3–2: 2000 + A2: 2005
EN 61000–3–11: 2000
Applied conformity evaluation method
Appendix V
Sound power level dB(A)
HD 10/25
Measured: 89
Guaranteed: 92
CEO
Head of Approbation

Kärcher HD 10/25-4 Cage Plus Specifications

General

Connected load	9200 W
AC input voltage	400 V
Number of phases	3
AC input frequency	50 Hz
Maximum pressure	273 bar
Working pressure (max)	250 bar

Weight and Dimensions

Depth	543 mm
Width	547 mm
Height	1104 mm
Weight	62000 g