Kärcher KM 100 User Manual

Operating instructions KM 100/100 R D English
32
Fixing point for jack (front wheel)
Jack fixing point (rear wheels)
! Lift the machine with the jack
! Remove the wheel nuts
! Slide the wheel off
! Position the spare wheel
! Screw on wheel nuts
! Lower the machine with the jack
! Tighten the wheel nuts
Note:
Use suitable, commercially available
jacks
Check engine oil level and
top-up
Danger!
Danger of burns!
! Let the engine cool-down
! Wait at least 5 minutes after
stopping engine before
performing the check
! Open unit cover, engage stay bar
! Turn out oil dip stock
! Wipe and insert oil dip stick
! Pull out oil dip stick
— At least a third of the oil dip stick
must be immersed into the oil.
— Refill engine oil up to lower edge
of tank inlet if the oil level is
below it.
! Fill engine oil using the oil
change pump 6.491-538
! Close the oil fill opening
! Wait for at least 5 minutes
! Check the engine oil level
For oil grade see: Technical data
Change the engine oil
! Turn out oil dip stock
! Suck out engine oil with oil-
change pump 6.491-538 through
the oil filler
! Fill in new engine oil with a clean
6.491-538 oil change pump using
the oil filler
For oil grade see: Technical data
! Close the oil fill opening
! Wait for at least 5 minutes
! Check the engine oil level
Checking/replacing the air
cleaner
! Open unit cover, engage stay bar
! Unscrew wing nut
! Remove, check and clean filter
insert
! Insert clean or new filter insert
into the suction container.
! Tighten the wing nut

Kärcher KM 100 Specifications

General

Brand	Kärcher
Model	KM 100
Category	Blower
Language	English