Kärcher RCV 3 User Manual

English 19
a Open the cover at the top.
b Press the clamp.
c Remove the dust container.
3. Empty the dust container.
a Fold the flap down.
b Empty the dust container.
c Fold the flap upwards until it audi-
bly engages.
4. Install the dust container.
a Press the dust container into posi-
tion until it audibly clicks into
place.
b Close the cover at the top.
5. Press the On / Off button.
The cleaning process continues.
Cleaning the wiper cloth
The wiper cloth can be cleaned during
a cleaning process.
1. Press any key.
The cleaning robot stops.
2. Remove the wiper cloth holder.
a Press the clamps together.
b Remove the wiper cloth holder.
c Pull the wiper cloth off the wiper
cloth holder.
3. Clean the wiper cloth.
4. Install the wiper cloth, see chapter
Installing the wiper cloth holder with
wiper cloth.
5. Press the On / Off button.
The cleaning process continues.
Transport
If possible, only transport or return the
device in its original packaging. If the
original packaging is not available,
please contact our service.
Safety instructions for transport
The lithium-ion battery is subject to the
requirements of dangerous goods reg-
ulations.
An undamaged and functional battery
can be transported by the user in pub-
lic traffic areas without any further re-
quirements.
When shipping via third parties (trans-
port companies), observe the special
requirements for packaging and label-
ing.
Observe the national regulations.

Kärcher RCV 3 Specifications

General

Product type	Accessory kit
Brand compatibility	Kärcher
Suitable for vacuum cleaner type	Robot vacuum
Number of pads	1
Number of brushes	3
Number of filters	2 pc(s)
Quantity per pack	6 pc(s)
Package weight	400 g

Weight and Dimensions

Depth	190 mm
Width	125 mm
Height	82 mm
Weight	100 g