Kärcher RCV 3 User Manual

24 English
a Fit the brush bearing.
b Fit the brush.
c Fit the brush cover and press it
down until it audibly latches into
place.
Replacing the side brush
We recommend replacing the side
brush after 3 to 6 months.
Note
To avoid damage, do not place the ro-
bot on the laser sensor (LiDAR).
1. Turn the cleaning robot over.
2. Remove the side brush.
3. Install the new side brush.
Replacing the battery
The battery has reached the end of its
service life if the cleaning robot con-
stantly travels to the station for
charging after a short cleaning opera-
tion.
1. Switch off the cleaning robot, see
chapter Switching off the cleaning
robot.
2. Send the cleaning robot to Custom-
er Service. Observe the regulations
for shipping lithium-ion batteries,
see chapter Transport.
Troubleshooting guide
Malfunctions often have simple causes
that you can remedy yourself using the
following overview. When in doubt, or
in the case of malfunctions not men-
tioned here, please contact your autho-
rized Customer Service.

Kärcher RCV 3 Specifications

General

Product type	Accessory kit
Brand compatibility	Kärcher
Suitable for vacuum cleaner type	Robot vacuum
Number of pads	1
Number of brushes	3
Number of filters	2 pc(s)
Quantity per pack	6 pc(s)
Package weight	400 g

Weight and Dimensions

Depth	190 mm
Width	125 mm
Height	82 mm
Weight	100 g