26 English
Steam iron with special steel sole
(order no. 2.884-503)
Anti-stick sole plate
(order no. 2.860-132)
Professional steam iron with aluminium
sole (order no. 2.884-504)
Anti-stick sole plate
(order no. 2.860-131)
Ironing table with active steam extraction
(order no. 6.906-002)
For excellent ironing results with a substan-
tial saving of time (only for 230 V)
Wallpaper remover
(order no. 2.863-062)
Round brush kit
(order no. 2.863-058)
- 4 round brushes for the detail nozzle.
Round brush kit with brass bristles
(order no. 2.863-061)
- 3 round brushes for the detail nozzle (for
particularly stubborn dirt)
Terry cloths (order no. 6.369-481)
- 5 floorcloths
Terry covers (order no. 6.370-990)
- 5 covers
Terry cloth kit (order no. 6.960-019)
- 2 floorcloths, 3 covers
Microfibre cloth kit (order no. 6.905-921) -
1 floorcloth, 1 cover with extremely high ab-
sorbency and ability to pick up dirt
Bio-descaler RM 511 (order no. 6.290-239)
3 x 100 g powder for the cleaning of the boi-
ler.
Round brush with scraper
(order no. 2.863-140)
Rubber lip for window nozzle
(order no. 6.273-140)
Textile cleaning nozzle
(order no. 4.130-390)
Steam turbo-brush
(order no. 2.863-159)
몇 DANGER
Always disconnect the mains plug and allow
the steam cleaner to cool down before per-
forming any maintenance work.
As limescale builds up on the boiler walls,
we recommend to descale the boiler in the
following intervals (RF=reservoir fillings):
Note: If you always use usual commercial
distilled water it is not necessary to descale
the boiler.
Î Disconnect the steam cleaner from the
electrical network.
Î Remove the water reservoir.
Î Remove the accessories from the acces-
sory compartments.
Î Open the steam boiler seal (A7) using
the descaling key (A4).
Figure 11
Î Completely empty the steam boiler.
Figure 12
Special Accessories Overview
Maintenance and Care
Descaling the Steam Boiler
Degree of hardness mmol/l RF
Isoft 0-1.3100
II medium 1.3-2.5 90
III hard 2.5-3.8 75
IV very hard >3.8 50