To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if the Kärcher Windsor Armada BRC 40/22 Floor Machine has no power and the power light is off?
First, ensure the power cord is properly plugged in. Check the machine's circuit breaker and the building's circuit breaker and reset them if tripped. If these steps don't resolve the issue, it could be a faulty switch or power cord, requiring professional service.
Why is the vacuum motor not running on my Kärcher Floor Machine?
The vacuum motor might not run due to several reasons. Check if the recovery tank is full and empty it, also clean the float screen. If the tank isn't full, there may be a faulty main vacuum switch, loose wiring, or a faulty vacuum motor, all of which require professional service.
General| Brand | Kärcher |
|---|---|
| Model | Windsor Armada BRC 40/22 |
| Category | Floor Machine |
| Language | English |
Provides an overview of the safety section and its importance for understanding hazards.
Explains the purpose of the operations section, familiarizing the operator with machine functions.
Details the maintenance section's content for keeping the machine in good working order.
Basic precautions must be followed, including reading all instructions before using this machine.
Defines levels of hazard intensity identified by signal words like WARNING and CAUTION.
Provides instructions for safely grounding the machine, including for 120 Volt models and extension cords.
Explains the functions of the solution, scrub, recovery, and operator control systems of the carpet extractor.
Details the physical dimensions and measurements of the carpet extractor.
Details the machine's display, main rotary control switch, and other operational controls.
Guides through pre-operation setup, filling the solution tank, and adjusting brush height.
Step-by-step guide on how to operate the machine, including starting, moving, and dispensing solution.
Instructions for cleaning in small areas, under desks, or in dead-end hallways.
Covers emptying the recovery and solution tanks and connecting accessory tools.
Details the service schedule, daily, regular, and periodic maintenance tasks.
Instructions for cleaning vacuum shoe and maintaining the scrub brush.
Covers circuit protection, troubleshooting common issues, and lists suggested spare parts.
