27
ANTRIEBSTECHNIK
GB
General
1.2 Identification of the unit
Input Specifications:
Input mains perm. mains voltage range
Input current during nominal load mains frequency
Output Specifications:
Output phases Output voltage range
Output current during nominal load Output frequency range
Max. output rated power of the inverter in relation to 230VAC
Recommended nominal data of the motor to be used
COMBIVIS Identification number:
Part number: 07.F4.S0C-1220
Serial number:
Unit Size
The following performance
data apply to 2/4-pole
standard motors. For other
pole numbers the frequency
inverter must be
dimensioned onto the rated
motor current. With regard
to special-purpose or
medium frequency motors
please contact KEB.
2.1 Performance Data
2. Power Circuit
Size 05 07
Nominal power output
1)
[kVA] 0,9 1,6
Peak current ( <30s) [A] 4,6 8,0
Nominal output current [A] 2,3 4,0
Max. rated motor power [kW] 0,37 0,75
Max. switching frequency [kHz] 8 8
Power loss [W] 35 50
Load capacity 30s max. peak current
Mains voltage [V] 180...264 ± 0 %
Network phase 1
Mains frequency [Hz] 50 / 60 ± 2
Output voltage [V] 3 x 0 ... U
Mains
Output frequency [Hz] 0...409,58
Max. permissible mains fuse [A] 10 20
Supply cross section
2)
[mm
2
] 1,5 2,5
Permissible temp. limit value -25...70°C storage
-10...45°C in operation
Relative humidity max.95% (without precipitation)
Design-/protective system IP20
Noise suppression
3)
EN 50081-1/ 50082-2
Noise immunity IEC 1000 4-2/-3/-4/-5/-6
Emitted interferences EN55011-B / EN 55022-A
1)
In relation to 230V rated voltage
2)
Recommended minimal cross section at rated power and cable length up to 100m (copper).
3)
Only with optional built-in filter und shielded, grounded motor cable on both sides
To Next Page
Loading...
Need help?
General