11
Multiple Displays
Each measurement function has its own set of “multiple
displays” shown on the bottom line of the front panel
display. To scroll through the multiple displays available
for the present function, repeatedly press and release
the NEXT DISPLAY key. The same action with the PRE-
Vious DISPLAY key does a reverse scroll through the
displays. To return to the default reading display, just
press and hold either key.
Table 1. Multiple displays by function
Function Next display
All Bar graph
Zero-centered bar graph
Maximum and minimum values
Relative and actual values
Calculated and actual values (see Note 1)
Limits bar graph (see Note 1)
Adjacent channel readings (see Note 2)
DC voltage DC volts, AC ripple voltage and frequency
Positive peak spikes and highest value
Negative peak spikes and lowest value
Positive and negative peak spikes
AC voltage AC RMS voltage, frequency, and crest factor
AC RMS, average, and peak voltages
DC current (none specific to function)
AC current AC RMS (or average) current and frequency
AC RMS and average current
2-wire resistance Source current
Voltage drop across DUT
4-wire resistance Source current
Voltage drop across DUT
Lead resistance
Frequency Period calculation
Trigger level
To Next Page
Loading...
Need help?
General
