Keithley 2001 Quick Reference Guide

31
LIMITS
LIMIT-SET-1
CONTROL
LOLIM1
HILIM1
LIMIT-SET-2
CONTROL
LOLIM2
HILIM2
STROBE-CONTROL
PASS-PATTERN
Limits menu:
Limit-Set-1 menu:
Enable/disable limit set #1.
Set value of low limit #1.
Set value of high limit #1.
Limit-Set-2 menu:
Enable/disable limit set #2.
Set value of low limit #2.
Set value of high limit #2.
Enable/disable limit strobe signal
of digital output #4 when trig-
ger occurs.
Specify patterns on digital out-
puts to signify limits pass.
STATUS-MSG Enable/disable status message
mode.
GENERAL
DIGITAL-I/O
OUTPUT-STATE
OUTPUT-SENSE
INPUT
SERIAL#
AUTOZERO
General menu:
Digital I/O menu:
Check/change states of digital
output lines.
Check/change sense of digital
output lines.
Read digital input line.
Display serial number, memory
option, SCPI version, and
firmware revisions.
Disable or enable normal (after
every reading) or synchronous
(every 200ms) autozero mode.
GENERAL
LINE-SYNC
DECIMAL
Enable/disable line synchroniza-
tion of measurements.
Select period or comma for dis-
play of decimal point.
Table 17. Main menu structure (cont.)
Menu item Description

Keithley 2001 Specifications

General

Brand	Keithley
Model	2001
Category	Multimeter
Language	English