Keithley 263 Quick Reference Guide

FRONT PANEL PROGRAMS
The available front panel programs are summarized in
Table 1. Perform the following steps to use B program:
1. Display the desired program using the MENU button.
2. Use the ADJUST A or ADJUST 7 button to change the
program pammeter.
3. To enter the new program paramter, press the MENU but-
ton again. The instrument will return to normal operation.
Note: The IEEE address fProgram IEEE1 and the display
mode IProgram dlSPl are stored in memory. Thus, the :~~ i
instrument will power-up to the programmed parameters.
Temperature compensation status is not stored and will I
always power up enabled Ill.
Table 1. Front Panel Programs
Check or change IEEE-488 bus address 10
Selects alternate display mode; engineer-
ing units lpi or scientific notation l-61.
Check or change temperature compensa-

Keithley 263 Specifications

General

Brand	Keithley
Model	263
Category	Test Equipment
Language	English