To Next Page

To Previous Page

Series 3700A System Switch/Multimeter Reference Manual Section 11: TSP command reference

3700AS-901-01 Rev. D/June 2018 11-275

lan.trigger[N].connected

This attribute stores the LAN event connection state.

Type

TSP-Link accessible

Affected by

Where saved

Default value

Attribute (R)

Yes

Not applicable

Usage

connected = lan.trigger[N].connected

connected

The LAN event connection state:

▪ true: Connected

▪ false: Not connected

The LAN event number (1 to 8)

Details

This read-only attribute is set to true when the LAN trigger is connected and ready to send trigger

events following a successful lan.trigger[N].connect() command; if the LAN trigger is not

ready to send trigger events, this value is false.

This attribute is also false when either lan.trigger[N].protocol or

lan.trigger[N].ipaddress attributes are changed or the remote connection closes the

connection.

Example

lan.trigger[1].protocol = lan.MULTICAST

print(lan.trigger[1].connected)

Outputs true if connected, or false if not

connected.

Example output:

false

Also see

lan.trigger[N].connect() (on page 11-274)

lan.trigger[N].ipaddress (on page 11-277)

lan.trigger[N].protocol (on page 11-279)

Keithley 3706A Reference Manual

Other manuals for Keithley 3706A