26
APPLIQUEu_o,,,_:,1
Baste cutout applique to fabric, Set stitch width 2 to
4, Set stitch length at the red mark on the indicator
plate. Zigzag stitch around applique completely cover-
ing the raw edge,
SEWINGONLACE uso,_o_1
Set stitch width to 2. Set stitch length to 2 or 3.
Place fabric under the presser foot anti position lace
inch from edge of fabric, Position fabric and lace
so that right stitch catches left edge of lace, Continue
stitching so that edge of lace is overcast.
STRAIGHTORTHREE-CORNEREDTEAR
U_e disc _ 6
Stitch width 4
Stitch [ength at red mor_
Position tear under needle and stitch along the strai-
ght tear catching sides of material. When mending a
three cornered tear, stitch from each end to center.
To Next Page
Loading...
Need help?
General
