Important Tips Before Use
- 9 -
3. To prevent the robot from becoming
stuck, use furniture rises for spaces lower
than 3.15 inches (80mm). If necessary,
use the boundary strips to block off
problem areas.
4. Prevent the robot from vacuuming
wet areas as this could damage your
vacuum.
5. Remove any objects less than 0.6 inches
(15mm) in height as robot may climb
over.
1. Remove power cords and other
obstructions to prevent the robot from
getting entangled or trapped. You can
use cable ties to organize your wires and
power cords.
2. Fold tasseled edges of area rugs
underneath to prevent these from getting
entangled or trapped. The robot may
have trouble with dark colored rugs.
Block off areas as necessary.
USAGE TIPS
6. Anti-drop sensors detect when the robot
is near the edge of a top stair step or
other drop-off point. The sensors stop
the robot from tumbling down the stairs
or falling off steep drops. The robot may
have trouble if the sensors are dirty or if
used on reflective / dark colored floors.
If necessary, use the boundary strips to
block off problem areas.
NOTE:
Place physical barriers or
boundary strips in front of fireplaces and
areas that you do not want the robot to
enter. To order additional boundary strips,
please call 1-844-202-9924.
To Next Page
Loading...
Need help?
General
