Adjusting Oven Temperature
• How to adjust the oven temperature higher or lower
The temperature in the oven has been pre-set at the factory. When first using the oven, be
sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the
temperature in the oven can be adjusted. Before adjusting, test a recipe by using a
temperature setting that is higher or lower than the recommended temperature• The baking
results should help you to decide how much of an adjustment is needed•
INSTRUCTIONS PRESS
To adjust the oven temperature higher:
1 Press Bakefor 6 seconds (Fig. 1).• Bake
2. To increase the temperature use the number pads to enter the
desired change. (Example 30°F) @ @ (Fig. 2). The @ @
temperature may be increased as much as 35°F (19°C).
3. Press _ to accept the temperature change and the display
will return to the time of day (Fig. 3). Press _ to reject the
change if necessary•
To adjust the oven temperature lower:
1 Press B,kefor 6 seconds (Fig. 4). _-_
• Bake
2• To decrease the temperature use the number pads to enter the
®® ®®
Flex
Clean
desired change. (Example =30°F) and then press
:_o°.(Fig. 5). The temperature may be decreased as much as
35°F(19°C).
3. Press _ to accept the temperature change and the display
will return to the time of day (Fig. 6). Press _ to reject the
change if necessary.
Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature.
DISPLAY
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
34
To Next Page
Loading...
Need help?
General