Kenmore Sears 116 User Manual

Using a
screwdriver.
tighten the
screw,
CAUTION
Do not overtighten.
Overtighteningcould stripthe screwholes.
Do not operate the cleaner withoutthe screw in
place.
CORD ASSEMBLY
(STANDARDAND OPTIONALMODELS)
Make sure the
quick release
upper cord hook
isin the upright
position,
Remove the wire
tie from the
power cord
Wrap the power
cord around the
upper and lower
cord hooks,
W TOSTART
(STANDARD MODEL)
Unwrap the power cord. Plug the power cord into a
120 volt outlet located near the floor.
(OPTIONAL MODEL)
Release
1.Turn the quick
release cord hook
to either side and
down to release
the power cord.
2. Once the cord is
removed, lock the
cord into place by
forcing it into the
locking notch on
the body of the
cord hook as
shown.
3. Plug power cord into a 120-volt outlet Iocatea
near the floor.
WARNING
PersonalInjuryand ProductDamage Hazard
• DO NOTplug inifswitchisin ON position.Personnl
injuryor damage could result.
• DO NOTuseoutletsabove counters. Damage to
itemsinsurroundingarea could occur.
5

Kenmore Sears 116 Specifications

General

Brand	Kenmore
Model	Sears 116
Category	Vacuum Cleaner
Language	English