EasyManuals Logo

Kenwood DMF-9020 User Manual

Kenwood DMF-9020
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
DMF-9020/MD-2070 (En)
16
1
2
3
Use the following procedure to play an MD in the original
order of tracks from track No. 1.
Playback of Mini Disc
Before playing an MD
Load a Mini Disc.
Turn the power ON.
Start playback.
÷In a few seconds, playback starts from track No, 1.
÷If the “PGM” indicator is lit, press the CHARA. / P.MODE key of the
remote control unit to turn it off.
÷Insert a Mini Disc into the slot securely.
÷“READING” blinks while the unit checks the contents of the disc.
÷If a title has been assigned to the disc, that title will be displayed.
Elapsed time of track
being played
Track No. being played
Disc recorded in monaural mode
This unit is capable of playing a Mini Disc recorded in the
“monaural long-play mode.” As the “monaural long-play
mode” requires half the amount of data required for
stereo mode recording, the playing time (recording time)
of the disc is doubled (to max. 148 minutes) from that in
the stereo mode.
÷A Mini Disc recorded in the “monaural long-play mode” cannot be
played normally with equipment which is not compatible with
monaural playback.
In case no disc is loaded:
Set the TIMER switch to OFF.
Playing tracks in order from track No. 1
NO D
I
S
C
SEARCHPGM
MONITOR
ANALOG
32kHz
213
48kHz
44.1kHz
DIGITAL
OVER (
dB)
R
L
SINGLE
001
0
:00
15
912 7
5
1
3
40 30
21
18
0
SEARCHPGM
MONITOR
ANALOG
32kHz
213
48kHz
44.1kHz
DIGITAL
OVER (
dB)
R
L
SINGLE
001
4
:12
15
912 7
5
1
3
40 30
21
18
0
SEARCHPGM
MONITOR
ANALOG
32kHz
213
48kHz
44.1kHz
DIGITAL
In the direction of the arrow.
TIMER
OFF
PLAYREC
POWER
- O N OFF
73

Table of Contents

Other manuals for Kenwood DMF-9020

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood DMF-9020 and is the answer not in the manual?

Kenwood DMF-9020 Specifications

Digital Audio System IconDigital Audio System
playing rotationApprox. 400 rpm ~ 900 rpm (CLV)
frequency response (playback mode)8 Hz ~ 20 kHz (± 1 dB)
signal to noise ratio (playback mode)More than 112 dB
D/A and A/D Conversion IconD/A and A/D Conversion
D/A conversion1 Bit (24 bit type)
oversampling8 fs (352.8 kHz)
A/D converter4th order sigma-delta conversion+ D.R.I.V.E. conversion
Input and Output IconInput and Output
analog input sensitivity / input impedance500 mV / 22 kW
analog output level / output impedance2.0 V / Less than 300 W
headphone output50 mW/32 W load (Phones level MAX)
General Specifications IconGeneral Specifications
power consumption20 W
dimensionsW: 440 mm, H: 125 mm, D: 373 mm
weight (net)5.4 kg (11.9 lb)

Related product manuals