Kenwood DMX958XR User Manual

Other External Components
65English
■ [Rear Camera Settings *]
2
Adjusts the CMOS-3xx series with ID 1 ("Rear
Camera") set. For details, see the instruction
manual of your camera.
■ [Parking Guidelines]
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is “ON”.
■ [Guidelines SETUP]
If you select [ON] for [Parking Guidelines],
you can adjust the parking guidelines. See To
adjust the parking guidelines (P.66).
■ [Front Camera Settings *]
3
Adjusts the CMOS-3xx series with ID 2 ("Front
Camera") set. For details, see the instruction
manual of your camera.
■ [Front Camera Interruption *]
4
[10 sec]/[15 sec] (Default)/[20 sec]: The front
camera screen is displayed when return the
gear from the reverse (R) position.
[OFF]: Cancel.
*1 To use the function, it is necessary to set [Rear
Camera Interruption] to [ON].
*2 When CMOS-3xx series is connected with
this unit.
*3 To use the function, it is necessary to connect
CMOS-3xx series and to set [Camera
Assignment Settings] to [Front]. (P.65)
*4 To use the function, it is necessary to set [Rear
Camera Interruption] to [ON] and to set
[Camera Assignment Settings] to [Front].
(P.65)
Ñ To set up the camera
assignment settings
1
Touch [Camera Assignment Settings] on
the Camera screen. (P.64)
2
Select the item to set up.
■ [REAR VIEW CAMERA] (DMX958XR)
Change the HD camera picture quality
setting when an HD camera is connected.
■ [FRONT VIEW CAMERA / DASH CAM]
Set the camera assignment from view
camera connected to Front view camera/
Dashboard camera input terminal.
Change the HD camera picture quality
setting when an HD camera is connected.
(DMX958XR only)
■ [3rd VIEW CAMERA]
Set the camera assignment from view
camera connected to 3rd view camera input
terminal.
■ [AV-IN]
Set the camera assignment from view
camera connected to VIDEO input terminal.
3
Select the view camera to set up.
63 4 71
52
1
Picture quality settings
(DMX958XR) *
1
Switch the picture quality setting when an
HD camera for the rear/front view camera is
connected.
“HD”/“NTSC” (Default)/“PAL”
2
[Picture from view camera]
Displays the picture from the view camera
connected to the input terminal to be set.
(P.94)
3
[Front] *
2
Assign front position to the view camera
connected to the selected input terminal.
4
[Dashboard Camera] *
2
Assign dashboard camera position to the
view camera connected to the selected
input terminal.
5
[Right] *
2
Assign right position to the view camera
connected to the selected input terminal.
6
[Left] *
2
Assign left position to the view camera
connected to the selected input terminal.

Kenwood DMX958XR Specifications

General

Brand	Kenwood
Model	DMX958XR
Category	Car Receiver
Language	English