16
checking your microwave
Check your microwave after unpacking.
1. Pull the handle to open the door.
2. Place a cup of water on the glass turntable
plate. Make sure the cup is microwave-safe (it
should not have any decorative metal trim).
3. Close the door.
4. Press the stop/clear button to clear any
settings that have already been made.
5. Press the start/+30sec/confirm button
to start a simple 30-second microwave
cooking cycle that allows you to check the
operation of the microwave.
6. When the cooking cycle has finished, the
water should be hot (be careful when you
take the cup out of the microwave). Press
the stop/clear button to clear any settings.
For your safety, the microwave
stops if the door is opened during
cooking. Close the door and press the
start/+30sec/confirm button to continue
the cooking cycle.
4, 6
5
K20MSS10_IB_RC_131230_Michelle.indd 16 06/02/2014 12:09 PM
To Next Page
Loading...
Need help?
General
