20
3. Press the microwave button twice to select
the 80% microwave power, and the LED
display will show “P80”.
1. Press the defrost by weight/time button
twice to initiate the two-stage cooking with
defrost as the first stage. The LED display
will show “dEF2”.
2. Turn the timer/weight/auto menu dial to
adjust the defrosting time until the LED
display shows “5:00”.
two-stage cooking
For two-stage cooking, please follow the steps below.
For instance: If you want to defrost your food for 5 minutes and then to cook it with 80% microwave
power for 7 minutes.
4. Press the start/+30sec/confirm button to
confirm the microwave power level.
5. Turn the timer/weight/auto menu dial
to adjust the cooking time until the LED
display shows “7:00”.
6. Press the start/+30sec/confirm button to
confirm and start cooking. The microwave
will sound once to indicate that it has
started the defrosting count down. The
microwave will sound again as it starts the
microwave cooking (the second stage).
Upon completion the microwave will sound
five times.
7. Press the stop/clear button once to stop
the cooking. Press the stop/clear button
again to cancel the setting.
Do not press the start/+30sec/confirm
button at this stage.
Alternatively, after you press the
microwave button once, you can turn the
timer/weight/auto menu dial to change
the power level.
You can set a maximum of 2 stages for two-stage cooking. If defrosting is among one of
the stages, then it will be set as the first stage. Auto cooking and quick start cooking are not
available in two-stage cooking.
7
4, 6
2, 5
3
1
K20MSS10_IB_RC_131230_Michelle.indd 20 06/02/2014 12:09 PM
To Next Page
Loading...
Need help?
General
