Kenwood KDC-139 User Manual

10
|
KDC-MP439/KDC-MP3039/KDC-MP339/KDC-MP239/KDC-139
Menu Operation
Menu System
Setting various functions.
1 Enter Menu mode
Press the [B.BOOST] button for at least 1
second.
“MENU”/ “MEnU” is displayed.
2 Select the menu item
Press the top or bottom side of the Control
knob.
KDC-MP439/MP3039/MP339/MP239
Display Setting Setting overview Source
“CODE SET” Refer to
page 10
Sets security code. (Function of
KDC-MP439)
“CLK ADJ” Refer to
page 11
Sets the clock.
“DIM” ON/OFF* Adjusts the brightness of
the display according to the
surrounding illumination.
“SWPRE” R*/ SW Sets the preout output.
“SPRM” ON*/OFF Turns ON/OFF the Supreme
function.
“CRSC” OFF/ON* Switches to Monaural to decrease
noise when reception is poor.
“NAME SET” Refer to
page 11
Sets the display when switched
to AUX source.
“SCL” AUTO*/
MANU
Specifies whether the text is
scrolled automatically.
“AUX” OFF/ON1*/
ON2
Sets whether to display AUX
during source selection.
“CD READ” 1*/2 Sets the CD read mode.
“DEMO” Refer to
page 12
Specifies whether to enable
demonstration.
KDC-139
Display Setting Setting overview Source
“CLCK” Refer to
page 11
Sets the clock.
“REAR”/
”SUB”
REAR*/SUB Sets the preout output.
“CRSC” On*/OFF Switches to Monaural to decrease
noise when reception is poor.
“AUH” OFF/On* Sets whether to display AUX
during source selection.
*Factory setting
: Can be set in standby state.
: Can be set while Audio file source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Refer to the <Appendix> (page 14) for the details of the
menu items.
3 Set the menu item
Press the right or left side of the Control knob.
4 Exit Menu mode
Press the [B.BOOST] button.
Function of KDC-MP439
Security Code
When Security Code is set, possibility of theft
is reduced because input of Security Code is
prompted to turn on the unit once it is turned off.
⁄
• When you activate the Security Code function, it cannot be
released.
Note, your Security Code is the 4 digit number entered in
your “Car Audio Passport” in this package.
1 Enter Standby
Press the [SRC] button.
Select the “STANDBY” display.
2 Enter Menu mode
Press the [B.BOOST] button for at least 1
second.
When “MENU” is displayed, “CODE SET” is displayed.
3 Enter Security Code mode
Press the center of the Control knob for at least
1 second.
When “ENTER” is displayed, “CODE” is also displayed.
4 Select the digits to enter
Press the right or left side of the Control knob.
5 Select the Security Code numbers
Press the top or bottom side of the Control
knob.
6 Repeat steps 4 and 5, and complete the
Security Code.
7 Confirm the Security Code
Press the center of the Control knob for at least
3 seconds.
When “RE-ENTER” is displayed, “CODE” is also
displayed.
B64-3901-0000MEn.indd10B64-3901-0000MEn.indd10 07.7.107:18:39PM07.7.107:18:39PM

Kenwood KDC-139 Specifications

General

Brand	Kenwood
Model	KDC-139
Category	Car Receiver
Language	English