English
|
11
8 Do the step 4 through 7 step operation, and
reenter the security code.
“APPROVED” is displayed.
The Security Code function activates.
⁄
• If you enter a Code different from your Security Code,
you have to start over from step 4.
9 Exit Security Code mode
Press the [B.BOOST] button.
Resetting the Security Code function when the
audio unit is first used after removed from the
battery power source or the Reset button is
pressed
1 Turn the power ON.
2 Do the step 4 through 7 step operation, and
reenter the security code.
“APPROVED” is displayed.
Now, you can use the unit.
⁄
• If an incorrect code is entered, “WAITING” is displayed,
and the input prohibition periods shown in the table
below is generated.
After the input prohibition time lapses, “CODE” is
displayed, and you can reenter the code.
Number of times the
incorrect code was input
Input prohibited time
1—
2 5 minutes
3 1 hour
4 24 hours
Manual Clock Adjustment
1 Select Clock Adjustment mode
Press the top or bottom side of the Control
knob.
Select the “CLK ADJ”/ “CLCK” display.
2 Enter Clock Adjust mode
Press the center of the Control knob for at least
1 second.
The clock display blinks.
3 Adjust the hours
Press the top or bottom side of the Control
knob.
Adjust the minutes
Press the right or left side of the Control knob.
4 Exit Clock adjustment mode
Press the [B.BOOST] button.
Function of KDC-MP439/KDC-MP3039/KDC-MP339/
KDC-MP239
Auxiliary Input Display Setting
Selecting the display when changing to Auxiliary
input source.
1 Select Auxiliary input source
Press the [SRC] button.
Select the “AUX” display.
2 Enter Menu mode
Press the [B.BOOST] button for at least 1
second.
“MENU” is displayed.
3 Select Auxiliary input display setting mode
Press the top or bottom side of the Control
knob.
Select the “NAME SET” display.
4 Enter Auxiliary input display setting mode
Press the center of the Control knob for at least
1 second.
The presently selected Auxiliary input display is
displayed.
5 Select the Auxiliary input display
Press the right or left side of the Control knob.
Each time you push the knob, the display alternates
as listed below.
• “AUX”
• “DVD”
• “PORTABLE”
• “GAME”
• “VIDEO”
• “TV”
6 Exit Auxiliary input display setting mode
Press the [B.BOOST] button.
⁄
• When operation stops for 10 seconds, the name at that
time is registered, and the Auxiliary input display setting
mode closes.
• The Auxiliary input display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S220A is used.
B64-3901-0000MEn.indd11B64-3901-0000MEn.indd11 07.7.107:18:39PM07.7.107:18:39PM
To Next Page
Loading...
Need help?
General
