44
SETTINGSSETTINGS
Sound adjustment
R Using the sound equalization
• The adjustment is memorized for each source until
you adjust the sound again. If the source is a disc,
the adjustment is stored for each of the following
categories.
– DVD/DVD-VR/VCD
– CD
– MPEG1/MPEG2/MP3/WMA/WAV/AAC
• You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1 Display the <Equalizer> screen.
On the <TOP MENU> screen:
2 Select a sound mode.
• You can change the page to display more
items by pressing [J]/[K].
• You can also display the <Equalizer> screen by
pressing Volume/AUDIO/R-CAM knob on the
monitor panel.
Storing your own adjustment—Adjusting the
sound precisely
1 Select a sound mode. (See the left column.)
2 Select a band and adjust the level of the
selected band.
• The number of bands depends on the model.
• You can adjust the level by dragging the slider
or using [J]/[K].
• Repeat this step to adjust the level of other
bands.
The adjustments are stored and <User> is
activated.
3 Activate ([ON]) or deactivate ([OFF]) the
bass (<Bass EXT>) (1), and then adjust
the subwoofer level (2).
R Setting the car type and speakers
1 Display the <Car Setting> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Audio> menu screen.
2 Select a car type (1), and then select the
location of the speakers (2).
KVT-7012BTK.indb44KVT-7012BTK.indb44 2014/11/1919:262014/11/1919:26
To Next Page
Loading...
Need help?
General
