Kenwood KW-V230BT User Manual

4
INITIAL SETTINGSINITIAL SETTINGS
Initial setup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the
<Settings> screen. (Page55)
1 Perform the initial settings.
<Demonstration>
(Page56)
Activate or deactivate the
display demonstration.
<Language>
(Page57)
Select the text language
used for on-screen
information.
• Set <GUI Language>
to display the operation
buttons and menu items
in the selected language
([Local]) or English
([English]).
<iPod Setup>
(Page18)
Select the connection
method of iPod/iPhone.
<Rear Camera>
(Page35)
Configure the settings to
display the picture from
the connected rear view
camera.
<User
Customize>
(Page51)
Change the display design.
<Viewing Angle>
(Page56)
Select the viewing angle
in relation to the monitor
panel to make the panel
easier to see.
2 Finish the procedure.
The Home screen is displayed.
Clock settings
1 Display the Home screen.
On the monitor panel:
2 Display the <Clock> setting screen.
• You can also display the <Clock> setting
screen by touching the clock area on the
Home screen.
2017KW-VEntryK.indb42017KW-VEntryK.indb4 2016/06/0221:222016/06/0221:22

Kenwood KW-V230BT Specifications

General

Brand	Kenwood
Model	KW-V230BT
Category	Receiver
Language	English