Kenwood L-A1 User Manual

Before applying power
For Europe
A\ Caution: Read this page carefully to ensure safe operation.
For other countries
important!
Units shipped to Europe are designed for operation on
230 V AC only.
For the United Kingdom
Important!
Units shipped to the U.K. are designed for operation on 240
volts AC only.
The mains plug must be removed from the wall socket prior to
any internal examination.
The wires in this mains lead are coloured in accordance with
the following code:
BlUGsxcesecre etn ated ee Neutral
BLOWN): csccsssevabseceiereevednensipencdieths Live
The wires in this mains lead must be connected to the
terminals in the plug as follows:
Wire colour Plug terminal marking
» (BIUO. ss aishditieeenda nies N or Black
BrOWNinn ccs iestasees tevaasiesdosseaeauatys L or Red
| Brown to
Live
Blue to € )
Neutral
N
Plug -—
Notes:
1.
Ifa
13-amp
plug
is
used,
this
must
be
fitted
with
a
13-amp
fuse.
2.
Ifa
3-pin
plug
with
earthing
contact
is
used,
no
wire
must
be
connected
to
the
E
terminal.
Important!
Units shipped to countries not specified on the left-hand side
are equipped with an AC voltage selector switch on the rear
panel. Refer to the following paragraph for the proper setting of
this switch.
AC voltage selection
This unit operates on 110 - 120 or 220 - 240 volts AC. The AC
voltage selector switch Type A or Type B on the rear panel is set
to the voltage that prevails in the area to which the unit ‘is
shipped. Before connecting the power cord to your AC outlet,
make sure that the setting position of this switch matches your
line voltage. If not, it must be set to your voltage in accordance
with the following direction.
Note: —_
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector
switch.
Safety precautions
AC voltage selector switch
Type A =
AC 110- AC 220-
120V~ 240v~
Type B
AC 110- | AC 22e0V~ AC 230-
OvV~ 240V~
Move switch Jever to match your line voltage
with a small screwdriver or other pointed tool.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTU
As
CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
MISK'OF ECEGTRIS SHOCK COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER
DO NOT OPEN SERVICING TO
QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER T
TO THE PRESENCE OF UNINSULATED “DANGEROUS VOL-
TAGE” WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITH!
THE USER TO THE PRESENCE
N AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT
OF IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

Kenwood L-A1 Specifications

General

Brand	Kenwood
Model	L-A1
Category	Amplifier
Language	English