Thank
you for purchasing this new DC Power Supply.
This
unit
has been carefully engineered and
manufactured to
rigid
quality standards, and should give you satisfactory and dependable operation for many
years.
This
Instruction Manual covers the
following
model versions:
U.S.A.
and
Canada,
Europe
and Oceania,
U.K.,
and
General
Markets
The
following
explicit definitions apply in this Instruction Manual.
WARNING
:
Risk
of fire or electric shock may occur. DO NOT
DISREGARD!
CAUTION
: Equipment damage may occur, but not personal injury.
NOTE
: If disregarded, inconvenience only, no risk of equipment damage or personal injury.
IMPORTANT
1.
Please
read this Instruction Manual carefully before placing your
DC
Power Supply in
service.
2.
Save
this Instruction Manual.
NOTE
The
first time this equipment is
used,
a faint odor may be given off by the power transformer.
This
is merely
the filler in the power transformer or the wax on the capacitors evaporating as the
unit
warms up.
This
is
normal and is not a defect.
For
United Kingdom
Always
remove the mains plug
from
the wall
outlet
prior
to any
maintenance of this equipment.
WARNING:
THIS
EQUIPMENT
MUST
BE
EARTHED.
IMPORTANT:
This
plug contains a 13 ampere
fuse.
Should the fuse need to be
replaced,
ensure that the replacement fuse has a current rating
of 13 amperes. Use only fuses stamped
with
an
ASTA
or BSI
approval mark on the body of the fuse.
If the moulded plug is incompatible
with
the outlets in your home,
remove the
fuse,
then cut off and discard the plug. There is danger
of
severe
electrical shock should the cut off plug be inserted
into
a
live
outlet.
If a new plug is fitted, observe the wiring code as
shown below. If in
doubt,
consult a qualified electrician.
The
wires in the mains lead of this product are coloured in
accordance
with
the
following
code:
Green
and Yellow: Earth
Blue
: Neutral
Brown :
Live
As
wire colours in the mains lead of this equipment may not
correspond
with
the coloured markings identifying the terminals
in your plug, proceed as follows:
Wire colour Plug terminal marking
Green
and Yellow E or or Green or Green and
Yellow
Blue
N or
Black
Brown L or Red
Green and Yellow
to Earth
IF
IN
DOUBT-CONSULT
A
COMPETENT
ELECTRICIAN.
Brown to
Live
Blue to
Neutral
Plug-
2