4.
OPERATION
5.
MAINTENANCE
WARNING
1.
Do not operate the DC Power Supply with the
packing materials attached.
2.
Never remove the
case.
If the internal parts are
accidentally
touched, a serious electric shock
might
occur.
3.
To reduce the risk of fire or electric shock, do
not expose the DC Power Supply to rain or
moisture.
NOTE
For
operation of the radio, refer to the Instruction
Manual provided with the radio.
CONTROL
AND
FUNCTIONS
Fig.
4-2. Rear Panel
®
POWER
ON Indicator
This
Indicator lights when the DC Power Supply is
on.
©
POWER
Switch
This
switch turns power on and off.
©BAIL
Used
to elevate the
front
Panel.
@
Output
Terminals
©Fuse Holder
Contains
a specified
fuse.
©AC Power Cable
1.
Turn the radio
POWER
switch on after the DC
Power
Supply
POWER
switch is turned on.
NOTE
If the DC Power Supply protection circuit
operates,
turn
the
POWER
switches of
both
the
radio and the DC Power Supply off, and perform
the procedure above again.
2.
When communication is completed for the day,
turn
off the
POWER
switches of
both
the radio
and
the DC Power Supply.
5-1.
GENERAL
INFORMATION
Your
DC Power Supply has been factory adjusted
and
tested to specifications before shipment. Under
normal circumstances, the DC Power Supply will
operate in accordance with these operating
instructions. All adjustments were preset at the
factory and should only be readjusted by a qualified
technician
with proper test equipment. Attempting
service
or adjustment
without
factory authorization
can
void the DC Power Supply's warranty. If your
DC
Power Supply fails to work, contact the
authorized
KENWOOD
dealer from which you
purchased
it for quick, reliable repair.
NOTES
1.
When claiming warranty
service,
please include
a
photocopy of the
bill
of
sale,
or other proof of
purchase
showing the date of
sale.
2.
Record the Date of
Purchase,
Serial
Number
and
Dealer from whom purchased.
3.
For your own information, retain a written record
of any maintenance performed on the unit.
5-2. SERVICE
Should
it ever become
necessary
to return the
equipment to your dealer or
service
center for repair,
pack
in its original box and packing, and include a
full
description of the problems involved. Also
include your telephone number. You need not return
accessory
items unless directly related to the
service
problem.
CAUTION
Do not pack the equipment in crushed newspaper
for shipment.
Extensive
damage may result during
shipment.
NOTE
If you desire to correspond on a technical or
operational problem, please make your note short,
complete, and to the
point,
and
PLEASE
make it
readable.
Please
list:
Model and
Serial
Number.
The
problem you are having.
Please
give sufficient detail to diagnose.
Information such as other equipment in the station,
meter readings and anything
else
you feel
might
be useful in attempting diagnosis.
6
Fig.
4-1. Front Panel
To Next Page
Loading...
Need help?
General
