1.
BEFORE
OPERATION
TO
PREVENT
ELECTRIC
SHOCK,
FIRE
AND
OTHER
INJURY.
PLEASE
NOTE
THE
FOLLOWINGS:
Do
not place this unit, where it will be exposed to
direct sunlight or close to heating
appliances.
Do
not place anything on top of the cabinet.
To
ensure good ventilation, do not put anything on
top of the cabinet and allow at least 15 cm (6
inches)
of
space
behind the unit.
Do
not drop
pieces
of metal, needles, coins and
other electrically conductive materials
into
the unit.
Do
not touch the power plug, when your hands are
wet.
Do
not pull the power cord, when disconnecting it
from the AC wall outlet.
Grasp
the plug and ensure
that your fingers do not touch the live pins.
Do
not place the unit in
areas
of
excessive
dust,
high humidity or on unstable
surfaces.
To
avoid risk of electric shock, under no
circumstances
should the unit be opened:
If an abnormal odor or smoke is detected,
immediately turn the power off and pull out the
power plug. Contact the
KENWOOD
service
station
or your dealer.
CLEANING
1.
Turn the power off, before cleaning the unit.
2.
Do not use any type of abrasive pad, thinner,
benzine
or any
substances
which may damage
the unit.
3.
Wipe the
front
panel and other exterior
surfaces
of the unit with a soft dry cloth or a soft cloth
lightly moistened with water.
3
To Next Page
Loading...
