Kenwood VR-209 User Manual

Page references such as “RC-_i0,” indi-
cate pages in the remote control operation
manual (Separate booklet).
@ POWER key ~ jz
Use to turn the receiver on and oft.
Use in combination with the input selector
(AUDIO, VIDEO. or TV) keys and SHIFT
key to turn various components on and off.
@ MACRO key RC~_ 5.
Use in combination with the AUDIO. VIDEO.
or TV keys to execute a senes of com-
mands automatically (MACRO PLAY)
© VIDEO selector key
Selects the video inputs and sets the re-
mote control to operate the component
registered at the respective input.
© Muiti controt keys RC ~_ia.
Use to operate the selected component.
REC key RC-_ia
Use to operate the selected component.
@ TUNING/SKIP key
Use during tne setup procedure to specify
various settings. Use to operate the tuner
or selected component.
@ SUBWOOFER key ~ 20.
Use in combination with the VOLUME +/-
keys to adjust the volume of the subwoofer.
©
© :
THEME Fay
SH
. Twealniw ALT AUO
© FUNCTION SHIFT key RC - 34.
Use in combination with the numeric keys
to execute alternate commands.
© Numeric keys RC — 34
Provide functions identical to those of the
onginal remote contro! supphed with the
component you are controling.
To access the functions printed above the
keys, press within 3 seconds of pressing
the FUNCTION SHIFT key Function avai-
ability varies for each component.
@® SHIFT key RC- 5.
Use in combination with the AUDIO and
VIDEO keys to cnange the remote contro:
mode without changing the input selector
or in combination with the POWER key to
turn on and off components programmed
into the remote control
@ TV selector key
Sets the remcte control to operate a TV or
cable box Tnis key does not change the
input setector on ihe receiver
There are some cases in which keys (or
knobs) that have the same function on
the receiver and on the remote control
have different names. in the instruc-
tions of this manual; if the names of
corresponding keys (or knobs) on the
receiver and remote contro! are differ-
ent, the name of the remote control key
is indicated in parentheses.
@ AUDIO selector key
Seiects the audio inputs and sets the re-
mote control to operate the respective
KENWOCD audio component
if you connect audio components from
KENWOOD and other makers to the MD/
TAPE or CD jacks. you can set the remote
control to operate these components by
reqgisiering the appropriate setup code at
the respective input.
@ GUIDE key RC~ 75.
Use to activate the OSD menu functions of
registered components.
@ VOLUME key ~ 18
Use to adjust the receiver volurne.
@ MUTE key ~ 16,
Use to temnorariiy mute the sound
@ SOUND key ~ 20
Use to adjust the sound quality and ambi-
ence effects
Lal
@ LISTEN MODE key ~ 28,
Use io seiéct the iistering mode.
@ SETUP key — 13,
Use to sélect the surround sound settings.

Kenwood VR-209 Specifications

General

Brand	Kenwood
Model	VR-209
Category	Stereo Receiver
Language	English