440-BA-e-1744
9.3 Description of individual menu items
In weighing mode keep the PRINT key pressed until [Unit]
appears.
Press SET key, the selected unit is displayed.
Use the MODE key to select between the different units (see
following table).
Use the SET key to confirm the selected unit
Grain (dependent on model)
Pennyweight
(dependent on model)
Carat (dependent on model)
Freely selectable factor *)
*) Input conversion factor
As specified above, press repeatedly the MODE key until „FFA“
appears.
To enter the factor, press the SET key; the enabled digit starts
flashing.
Using the MODE button, the displayed value is increased by 1,
with the PRINT button it is reduced by 1.
With the TARE key selection of the number to the left.
Confirm input by pressing the SET key.
Press repeatedly the SET key to take over the „Freely
selectable factor“ as current weighing unit.
The different weighing models have integrated different foreign weighing units.
Details can be seen in this table:
To Next Page
Loading...
Need help?
General
